Backhoe Safety Sticker kit

KIT-BH001

Backhoe Safety Sticker kit.

This Kit has every backhoe sticker needed to keep your operators and workers safe on the job site. You will find backhoe decals for dangers and warning and for backhoe maintenance like grease here, Check fluids daily etc. Each Backhoe Safety Sticker Kit has decals that are laminated to protect from water, UV, Oils, hands etc.

This Kit Includes The Following Backhoe Stickers:

10 - I-035 Grease Here

4 - CBH-001 Crush Hazard Do Not Stand Under Unsupported Load Backhoe

4 - C-002 Pinch Point Crush

2 - C-003 Proximity Danger

2 - EC-009 Electrical Hazard

1 - I-006 Hydraulic Oil

1 - I-007 Diesel Fuel

1 - I-011B Read Operators Manual

1 - I-018 Notice Check Fluids

1 - I-042 Never Leave An Unsafe Machine

1 - I-046 Never Dig

1 - I-040 Inspect Machine Before Use

1 - WRN-003 Battery Fire Hazard Warning

 

30 Backhoe Stickers In Total.

Backhoe Sticker Kit contains all the stickers you need for most Backhoe's to pass certification. Electrical Hazard, Crush Hazard, Fall Hazard, Diesel Fuel, Hydraulic Oil,  Grease Here, Check Fluids, Battery Hazard, Never Dig and more.

You will find all your backhoe stickers here.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search