Boom lift inspection reports, pre-use checklists and inspection stickers serve different purposes. A report documents inspection findings, a pre-use checklist records checks before operation, and a sticker displays inspection information on the machine.
Choose the product that matches the work being documented. Check the form’s wording against the specific lift manufacturer’s instructions rather than assuming one checklist covers every boom lift.
This guide focuses on personnel platforms supported by an articulating (jointed) or telescopic (extending) boom. These are different from scissor lifts, which raise the platform on crossed supports beneath it.
The annual report shown in this guide is headed “Boom Lift & Trailer Mounted Boom Lifts.” That wording identifies its intended equipment category, not guaranteed compatibility with every machine. Compare the complete form with the current inspection requirements for your specific make, model and configuration.
Bucket trucks are also personnel-elevating equipment, but that does not make this report suitable for every bucket truck. Likewise, a crane hoisting a suspended load or personnel platform is a different application. Do not select the report solely because the machine has a boom or lifts people.
The OSHA construction provisions discussed below apply within their own equipment and work-setting scope. Follow the specific machine’s manufacturer instructions when choosing inspection forms, replacement decals and inspection schedules.
The Annual Boom Lift Inspection Report is a physical, three-part paper report with white, yellow and pink copies. Its listed size is 8½ × 12 inches, with packs of 10, 25, 50, 100, 250 or 500 report sets.
The report includes machine identification, inspection results, comments and signature fields. Inspection sections cover functions and controls, platform assembly, boom assembly, turntable, chassis, power systems, hydraulic/electrical systems, manuals and decals, and general checks.
The listed example is headed “Boom Lift & Trailer Mounted Boom Lifts.” Review the product image and compare the complete form with the current procedures for your machine before ordering.
This report may be suitable for different boom-lift makes and models, but it is not a universal checklist. Before use, compare the form with your equipment manufacturer’s current inspection requirements to confirm it covers the checks required for your machine. It is also not a scissor-lift report, crane inspection report, automotive-lift form or downloadable PDF.
The Aerial Lift Pre-Use Inspection Checklist is an 8½ × 11-inch, three-part carbonless paper form. It provides inspection prompts, OK/NO/N/A selections, comments and equipment/operator identification fields. Its unit-type choices include articulating boom lifts.
For covered construction boom platforms, OSHA 29 CFR 1926.453(b)(2)(i) requires lift controls to be tested each day before use. OSHA’s aerial-lift guidance also describes a pre-start inspection before each work shift, following manufacturer recommendations.
Those checks are not replaced by an annual inspection report or a current inspection sticker. Compare the checklist with the specific machine’s instructions; selecting a form does not establish that every required check is included.
Check the applicable manufacturer’s inspection instructions and requirements for your specific boom-lift make and model. Confirm the required inspection items, inspection intervals, inspector qualifications and outstanding manufacturer safety bulletins.
An annual inspection report records findings; it does not set the inspection schedule. Do not treat the product name as a universal OSHA requirement to buy or display an annual inspection sticker.
The Custom Annual Aerial Lift Inspection Sticker measures 4 inches tall × 5 inches wide. It accepts company-detail customization and is available in packs of 10, 25, 50 or 100.
Follow the product’s instructions for submitting company information, requesting a proof and marking the label. Apply inspection information only when it accurately reflects the completed work and applicable inspection program.
The sticker is separate from the paper report and is not included with the report sets. Neither product performs an inspection, qualifies an inspector, proves equipment condition or certifies compliance.
The Aerial Lift Stickers collection includes selected warning labels, capacity markings and inspection products for different equipment applications. It is not a complete model-specific boom-lift decal kit.
Match each replacement label’s wording, dimensions and intended location to the machine manufacturer’s instructions. Do not select a bucket-truck capacity label or equipment-specific operating message simply because it appears in the same collection.
For related equipment, see the scissor-lift inspection guide. For the aerial-device capacity and fall-protection topics already covered in our broader reference, see Find Crane Labels by OSHA Cited Standard. Apply each section only to the equipment and work setting it describes.
This report may be suitable for different boom-lift makes and models, but it is not a universal checklist. Before use, compare the form with your equipment manufacturer’s current inspection requirements to confirm it covers the checks required for your machine.
It is a physical printed product. Each annual report set has three copies: white, yellow and pink. It is not a digital download or online fillable form.
No. They document different inspection activities. Follow the machine’s required pre-use checks and maintenance/inspection program separately.
No. Inspection stickers are separate products. Order a label separately if your inspection program uses one to display inspection information.
Do not choose the boom-lift report for a scissor lift solely because both are elevating work platforms. A separate scissor-lift annual report is available. Compare its contents with the specific machine’s requirements.
No. The recorded result must reflect the actual inspection findings and any corrective work. A blank or completed form alone does not establish safe condition, authorize operation or certify compliance.
Use the following references alongside the specific machine’s manufacturer instructions. These support the distinctions above; they do not establish that our products are manufacturer-approved.
