Placement of Safety Stickers on a Boom Truck

Safety sticker locations on a boom truck depend on the crane’s manufacturer, model, configuration, and serial number. Start with the applicable operator and parts manuals rather than using a general list of mounting locations.

A replacement label needs to match both the required message and its intended position. A similar-looking warning placed elsewhere is not automatically an equivalent replacement.

Find the decal-location information for your boom truck

Record the crane manufacturer, model, and serial number before searching for replacement labels. Identify the crane equipment itself, not just the truck chassis.

Look in the applicable parts manual for a safety-decal diagram, decal list, or related assembly drawing. Use the operator manual for explanations of warnings and operating precautions.

For example, National Crane’s NC600E2 operator manual directs users to the parts manual for the locations of safety decals. It also explains that the decals illustrated in its safety section are examples and that the parts manual identifies the specific decals installed on the crane.

That reference is an example of the process, not a placement guide for every boom truck. Use documentation that matches your equipment, or contact the manufacturer or an authorized dealer if you cannot identify the correct manual.

Match the label before choosing its location

For each replacement, compare:

  • The manufacturer’s part number, when available.
  • The complete printed warning and instructions.
  • Symbols, language, and layout.
  • Label dimensions and available mounting space.
  • The location shown in the applicable decal diagram.

Photograph any remaining label and its surroundings before removal. Include a close-up of the wording and a wider view showing the component or panel.

If the label is completely missing, use the diagram or manufacturer’s guidance to identify it. Do not infer the correct warning solely from an empty space or adhesive outline.

Areas to check against the manufacturer’s diagram

Depending on the machine, its decal information may identify markings around operator controls, outriggers or stabilizers, access points, boom components, and other equipment areas.

Treat these as areas to review, not a universal checklist of required mounting positions. The correct message and location can vary between models and configurations.

Keep replacement labels associated with the component or hazard they identify. Do not cover controls, gauges, identification plates, load information, viewing areas, or other warnings.

Capacity markings are not a substitute for load charts

Distinguish a replacement capacity marking from the crane’s load charts and operating instructions. Do not choose a printed weight merely because it appears among a sticker’s available options.

Use the manufacturer’s applicable rating information for the actual equipment and configuration. A capacity sticker communicates supplied information; it does not calculate, establish, or increase the crane’s capacity.

If a rating plate, load chart, or configuration-specific marking is missing or unreadable, obtain the correct replacement information from the manufacturer or authorized source rather than substituting a general maximum-load sticker.

Electrical and power-line warnings

Warnings for onboard electrical components and warnings about overhead power-line contact address different hazards. Match each replacement to the message and location specified for the equipment.

Do not assume that a generic electrical-hazard label supplies the power-line instructions required for a particular operation. A warning sticker does not establish a safe clearance distance or replace planning, training, or the applicable operating procedures.

Check label condition and follow application instructions

Include labels in your equipment-condition checks. Look for missing, peeling, damaged, painted-over, or unreadable markings.

Before applying a replacement, confirm its wording and position, the suitability of the surface, and the label’s application instructions. Surface preparation, application temperature, and material suitability can vary by product.

If you cannot identify a required warning or its correct location, resolve that uncertainty with the manufacturer or authorized dealer before treating the replacement as complete.

Choosing replacement boom truck safety stickers

Browse our Crane and Boom Truck Safety Decals to compare available messages and formats.

For help matching a label, provide clear photos, its dimensions, the complete wording or part number, and the crane’s make and model. Include the relevant manual reference when available.

Our product listings can help you compare label designs. They do not replace the equipment manufacturer’s decal-location information, operating instructions, or applicable inspection procedures.

Leave a comment (all fields required)

Comments will be approved before showing up.