This Vehicle Stops at All Railroad Crossings Sticker – 12 × 6

ACC-007

This vehicle railroad-crossing stop sticker tells following motorists that the vehicle makes a full stop at all railroad crossings. A yellow CAUTION header sits above black lettering on a white background.

Full printed wording

CAUTION
THIS VEHICLE MAKES
A FULL STOP AT ALL
RAILROAD CROSSINGS

Size and format

The sticker measures 12 inches wide × 6 inches tall. This listing is for an adhesive vehicle notice, not a rigid sign, magnet or railroad crossing traffic sign.

Measure the available mounting area before ordering. This is the 12 × 6-inch format.

Recommended placement

Choose a suitable rear-facing fixed surface where following drivers can see the notice. Keep license plates, tail lamps, reflectors, cameras, required markings and the driver's view unobstructed. Check that doors, lifts or other equipment will not routinely conceal the message.

Apply to a suitable clean, dry surface. This is general visibility guidance, not a verified mounting location for a particular vehicle model. Reading distance depends on placement, lighting and viewing conditions; no fixed reading distance is specified.

Match the message to your vehicle

Choose this wording when it accurately describes the vehicle's railroad-crossing stopping practice. The label communicates that practice to other motorists; it does not determine which vehicles must stop, establish an exemption or replace driver training and applicable operating requirements.

This is a notice for following traffic, not instructions for judging whether a crossing is safe to enter.

For help with this label, contact us about the vehicle railroad-crossing stop sticker.

Created, printed, cut and shipped in the USA.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search