This
electrical line clearance warning sticker displays “THIS MACHINE NOT INSULATED” and a reminder to allow for boom sway, rock and sag, as well as electrical-line and loadline movement. Its red DANGER header and red-and-black wording distinguish the electrocution warning from an equipment rating or operating chart.
Printed wording
DANGER
ELECTROCUTION HAZARD
THIS MACHINE NOT INSULATED
MAINTAIN SAFE CLEARANCES FROM ELECTRICAL LINES AND APPARATUS. YOU MUST ALLOW FOR BOOM SWAY, ROCK AND SAG, & ELECTRICAL LINE AND LOADLINE SWAYING.
THIS LIFTING DEVICE DOES NOT PROVIDE PROTECTION FROM CONTACT WITH OR PROXIMITY TO AN ELECTRICALLY CHARGED CONDUCTOR.
YOU MUST MAINTAIN A CLEARANCE OF AT LEAST 10 FEET BETWEEN ANY PART OF THE CRANE, LOADLINE OR LOAD, ANY ELECTRICAL LINE OR APPARATUS CARRYING UP TO 50,000 VOLTS. ONE FOOT ADDITIONAL CLEARANCE IS REQUIRED FOR EVERY ADDITIONAL 30,000 VOLTS OR LESS.
DEATH OR SERIOUS INJURY WILL RESULT FROM CONTACT OR INADEQUATE CLEARANCE.
Important: printed distances are not universal operating guidance
The figures above reproduce the label artwork so you can compare the replacement with your existing warning. They must not be used as a universal clearance rule or as permission to operate near energized conductors. Match the required warning to your equipment and follow applicable requirements, utility instructions, the manufacturer's documentation and site-specific electrical safety procedures.
Product details
- Listed size: 3¾ inches wide × 5 inches tall.
- Product code: IBu-015.
- Non-OEM replacement reference: 4000145. Compare the complete wording, artwork and dimensions; the reference does not establish compatibility with every crane or aerial device.
- Vertical design with red DANGER header and border, black body text and red emphasized warnings.
Recommended placement
As general guidance, use a visible operator-facing fixed panel at the relevant operating station, where the warning can be read before operation. For equipment with exterior controls, a label inside the cab alone may not reach the operator at those controls.
Follow the equipment manufacturer's specified warning-label locations and replacement instructions. A factory position for a particular model has not been verified here. Keep controls, instruments, viewing areas and existing warnings unobstructed.
A warning label, not electrical protection
Applying this sticker does not insulate equipment, establish an insulation or voltage rating, verify electrical condition or determine a safe approach distance for a particular job. It is not a complete electrical work procedure, and it does not replace training or the required equipment and site checks.
Need a different size or help matching an existing warning?
Contact us with clear photos, dimensions and equipment details.