Jib Tilt Before Stowing Caution Sticker

IBu-013

This jib tilt before stowing caution sticker displays a reminder to tilt the jib approximately parallel to the upper boom before stowing the upper boom in its rest. The artwork has a red CAUTION header and border, with white wording on a black panel.

Printed wording

CAUTION
ELECTRICAL HAZARDS

TO PREVENT POSSIBLE DAMAGE
TO THE JIB AND TURNTABLE, JIB MUST
BE "TILTED" APPROXIMATELY PARALLEL
TO THE UPPER BOOM BEFORE STOWING
THE UPPER BOOM IN THE BOOM REST.

Product details

  • Listed dimensions: 3¾ inches wide × 2 inches tall.
  • Product code: IBu-013.
  • Horizontal layout with CAUTION and ELECTRICAL HAZARDS headings above the jib-stowing instruction.

Recommended placement

As general guidance, use a visible operator-facing fixed panel near the controls used for jib positioning and boom stowing, where the reminder can be read before that sequence begins. A cab-only location may not serve an operator working at exterior controls.

Follow the equipment manufacturer's required label location and replacement instructions. A factory position for a particular machine has not been verified here; do not assume that a turntable or boom-rest location is appropriate for every model. Keep controls, instruments, viewing areas and existing warnings unobstructed.

Match the stowing instruction to the machine

Compare the complete printed wording, dimensions and artwork with the label required for your equipment. The instruction describes a particular jib and upper-boom relationship; it is not a universal stowing sequence for every crane, bucket truck or aerial lift.

The ELECTRICAL HAZARDS heading is reproduced as printed. This label does not establish an insulation rating, provide electrical protection or explain an electrical work procedure. It also does not measure jib angle, verify clearance or guarantee that damage will be prevented.

Use the manufacturer's operator's manual for the complete positioning and stowing procedure. The sticker is a reminder, not a substitute for those instructions.

Browse our bucket truck safety stickers and aerial lift decals. For a separate wire-rope warning application, see our wire rope crane safety sticker.

For help matching an existing warning, contact us with clear photos, dimensions and equipment details.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search