OSHA 30 Hour Trained Sticker | Two-Star Badge

HHS-004C

This OSHA 30 Hour Trained sticker features a black-and-silver-look badge with large ‘OSHA’ lettering across the center and a star on each side. ‘30 HOUR’ appears above and ‘TRAINED’ below. The metallic effect is part of the printed artwork.

Product details

  • Includes one sticker
  • Measures 2¼ inches wide × 2 inches tall
  • Two-star badge design with printed silver-look lettering and borders
  • SKU: HHS-004C
  • Created, printed, cut, and shipped in the USA

This is a printed identification sticker, not a training card or proof of course completion. Buying or displaying it does not provide training or certification.

Check your hard-hat manufacturer’s instructions and your employer’s rules before applying stickers. Keep required markings readable.

Prefer another OSHA 30 Hour Trained design? Compare our red round sticker and our black-and-silver-look sticker with angled OSHA lettering.

Browse our full range of OSHA-trained hard hat safety stickers.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search