First Aid Kit Inside Sticker – Green & White Round Label

I-049

This First Aid Kit Inside sticker identifies the cabinet, compartment or storage box containing your first aid kit. Its round green design pairs white lettering with a white cross, so the message can be read without opening the storage area.

Printed wording and design

FIRST
AID KIT
INSIDE

A white cross appears below the wording on a green background.

Product details

  • Listed size: 5¼ inches in diameter.
  • Round first aid kit location label.
  • Green background with white lettering and cross.
  • Product code: I-049.

Recommended placement

Place the label on the outside of the cabinet door, compartment lid or box that actually contains the first aid kit. Choose a visible surface where the wording can be read while the storage area is closed.

Check that the full circular label fits without covering a latch, handle, viewing window or existing required marking. Keep the storage area accessible, and update the label if the kit is moved.

A location label, not a first aid kit

This product marks where supplies are stored; first aid supplies and a storage container are not included. It does not indicate that the kit has been inspected, is fully stocked or meets a particular workplace requirement.

The printed message says “INSIDE” and has no directional arrow. Use it on the actual kit storage location rather than as a route marker pointing toward supplies elsewhere.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search