Embossable Aluminum Vehicle Inspection Labels, 4 × 5 in.

CUST-Embossed-003-18Qty

These 4 × 5-inch embossable aluminum vehicle inspection labels serve as aluminum inspection decals for vehicles and equipment. Their white-coated surface is used for printed company information, while inspection details can be embossed into the aluminum.

Personalize each order

Enter your company name, address, and phone number in the Notes section of your cart. After placing your order, reply to your order confirmation email with the same details so they can be printed on the labels.

Product details

  • Finished label size: 4 × 5 inches.
  • White-coated aluminum surface for printing company information.
  • Emboss inspection information with a ballpoint pen or typewriter.
  • Available quantities: 18, 36, 54, or 108 labels.

Material and application specifications

  • Face material: 3-mil coated soft aluminum (polyurethane), according to the manufacturer’s material sheet.
  • Adhesive: permanent solvent acrylic; the material is not repositionable.
  • Apply to a clean, dry surface at 50°F or above.
  • Material service temperature: 0°F to 122°F, per the manufacturer.
  • The manufacturer’s material sheet lists up to 2 years for vertical outdoor exposure under normal conditions. Actual performance can vary with the surface and application.

Your company name, address, and phone number.

Enter them in the cart’s Notes section, then reply to your order confirmation email with the same information.

The labels are 4 × 5 inches, available in quantities of 18, 36, 54, or 108.

Support the label on a firm, flat surface and press the details into the aluminum with a ballpoint pen or stylus.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search