Do Not Lift Loads Over Personnel Danger Sticker – 4 × 2 Inches

DNGR-005

This Do Not Lift Loads Over Personnel danger sticker warns against using the machine to lift loads over people. A red DANGER header, bold CRUSH RISK wording and a crossed-out illustration of a suspended load above a person reinforce the message.

This is an overhead-load warning, not a “Do Not Lift Here” label identifying an unsuitable lifting point or a load-capacity label.

Full printed warning

DANGER
CRUSH RISK
DO NOT
USE THIS MACHINE
TO LIFT LOADS OVER
PERSONNEL

Size and product details

  • Size: 4 inches wide × 2 inches tall.
  • Product code: DNGR-005.
  • Laminated adhesive safety sticker.
  • Red DANGER header, black wording on white and a red prohibition symbol over a suspended-load illustration.
  • Created, printed, cut and shipped in the USA.

Recommended placement

As a general recommendation, place the warning on a visible panel beside the lifting controls, where the operator can read it before moving a load. For cab-operated equipment, choose an operator-facing panel at the operating position. For ground-operated equipment, use the corresponding control-station panel. Where the manufacturer's labeling plan calls for a warning to nearby personnel, an additional outward-facing label may be appropriate.

This is general guidance, not a verified factory location for a particular machine. Match the original warning location and manufacturer's instructions when replacing a label. Keep controls, instruments, load charts, viewing areas and existing warnings unobstructed.

Before ordering

Compare the full wording, illustration and 4 × 2-inch size with your replacement needs. This decal does not establish the machine's lifting capacity, approve a lifting attachment or confirm that a lift plan is safe. It is not a physical barrier and does not replace the manufacturer's operating instructions or site procedures for keeping personnel clear of loads.

For help matching a replacement label, contact us with a photo of the original warning and its dimensions.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search