Capacity Alert System Sticker For Cranes

I-045

This Capacity Alert System Sticker For Cranes is Printed With.

CAUTION!

THIS CRANE IS EQUIPPED WITH A CAPACITY ALERT SYSTEM. THE CAPACITY ALERT SYSTEM IS INTENDED TO BE USED AS AN AID TO PREVENT MOST OVER LOAD CONDITIONS. DO NOT USE THE CAPACITY ALERT SYSTEM AS A SUBSTITUTE FOR SAFE OPERATING PRACTICES. AS OUTLINED IN THE "SAFETY AND OPERATIONS" SECTION OF THE OWNER'S MANUAL, NOR AS A SUBSTITUTE FOR KNOWLEDGE OF THE WEIGHT OF THE LOAD TO BE LIFTED, THE LOAD RADIUS, OR THE, RATED CAPACITY.

DANGER!

DO NOT EXPECT THE CAPACITY ALERT SYSTEM TO DETECT ALL POSSIBLE OVERLOAD CONDITIONS. Consult your Owner's Manual for the complete listing of expected overload conditions.

JIB OPERATIONS

The capacity alert system does not provide an accurate indication of overload conditions when operating with a jib deployed. Reliance upon the system to warn of overload conditions with the jib deployed (or other expected overload conditions) can result in structural damage. instability. personal injury or death.

ATTENTION

WHEN AN OVERLOAD CONDITION IS REACHED, THE LIFT-DOWN, WINCH-UP AND BOOM-EXTEND FUNCTIONS WILL CEASE TO OPERATE.

TO RESET THE CAPACITY ALERT SYSTEM:
RELIEVE THE OVERLOAD CONDITIONS BY:
• WINCH THE LOAD DOWN
• RETRACTING THE BOOM
• LIFTING THE BOOM UP

This Crane Capacity alert system Sticker is similar to national 876415. Place this safety sticker to warn about the alert system's functions.

Crane Capacity Alert System Safety Label Size 6 inches wide by 6 inches tall.

This replacement decal is similar to National Crane 876415

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search