California BIT Inspection Stickers – Inspection & Due Date Record

BIT-Insp-001-16qty

California BIT inspection stickers provide a visible record of the inspection date and next inspection due date, with a separate line for the inspector’s name. Blue and red date grids distinguish the completed inspection from the next scheduled inspection.

Size, quantities and printed years

  • Each sticker measures 6½ inches wide × 3¼ inches tall.
  • Choose packs of 16, 32, 64, 128, 256 or 512 stickers.
  • Years are updated when printed, starting with the current year and continuing through the next three years.
  • Product images show an example year range; the years printed on your order are updated as described above.

Printed wording and date fields

BIT PROGRAM INSPECTION DATES RECORD

Maintenance inspections are required by law.
Have this equipment inspected on or before the punched next inspection due date.

Inspected By: [blank line]

The blue Inspection Date grid and red Next Inspection Due Date grid each include MONTH 1–12, DAY 1–31 and four YEAR choices.

Marking and placement

Punch the applicable month, day and year in each grid to record the inspection date and the next due date. Enter the inspector’s name on the “Inspected By” line. A long-reach hole punch for inspection stickers is available separately.

Choose a clean, smooth location where the person checking the equipment can easily find and read the date record. Do not cover other identification, warnings or required markings. Follow your fleet’s inspection and label-placement procedures.

This product is a date-record sticker, not an inspection service, inspection report or certification. Use the next-due date determined by your inspection program; the sticker does not establish the inspection interval or replace required records.

For separate paperwork, see our annual vehicle inspection reports.

Looking for a personalized annual inspection label? See our custom annual vehicle inspection stickers with your company details.

Read our annual vehicle inspection reports and California BIT stickers guide to compare paper reports, annual inspection labels and BIT date reminders, including their different documentation uses.

Each sticker measures 6½ inches wide × 3¼ inches tall. Choose packs of 16, 32, 64, 128, 256 or 512 stickers.

Punch the applicable month, day and year in the blue Inspection Date grid for the completed inspection and in the red Next Inspection Due Date grid for the next scheduled inspection. Complete the Inspected By line. Use dates established through your inspection procedures; the sticker does not set the inspection interval.

The product images show an example year range. Years are updated when printed, starting with the current year and continuing through the next three years.

No. This is an adhesive inspection-date record, not an inspection report, inspection service or certification. Keep the supporting records required for your vehicle and operation. Do not assume a BIT date-record sticker serves the same purpose as federal annual inspection documentation.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

  • 5 stars: 6 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
J
Justin

Just what we needed 👍

R
Rodney H. (United States)
Business as it should be

In todays online deceptive marketplace it is a pleasure to work with a company that sticks to old school principles. This company makes a fantastic product and backs it up with impeccable service. Not only do they deliver a quality product they honor their word, not something you find in most businesses today.

Thank you so much for your kind words! We truly strive to provide excellent products and service to our customers. We are delighted to hear that you had a positive experience with us. Your satisfaction is our top priority and we are happy to uphold old school principles in our business. Thank you for choosing us for your custom crane inspection sticker needs. We appreciate your support and loyalty. Have a great day!
Dave

R
ROD H.E.L.
CUSTOM INSPECTION STICKERS

IT IS A RARE THING IN TODAYS WORLD OF E-COMMERCE TO GET IMPECCABLE PERSONAL SERVICE, A PRODUCT THAT EXCEEDS YOUR EXPECTATIONS, QUALITY MATERIALS , IN A TIMELY FASHION. ALL OF OUR DECALS WILL BE COMING FROM HERE IN THE FUTURE. EXCELLANT COMPANY

Thank you for the review, We are here anytime you need anything.

C
Craig C.
First Time Purchase

This was my first time using this vendor. The customer service and website were great.

J
Jamie H.
Crane Inspection Stickers

good stickers

Thank you for the review. I am glad you liked them.

Search