Never Lift Loads Over People Danger Sticker – C-009

C-009

This Never Lift Loads Over People danger sticker carries two instructions: do not lift loads over people, and never walk or stand under a suspended load. C-009 features a red DANGER header with a white safety-alert triangle, black lettering on white, and a crane lifting a load above a person crossed out by a red circle and slash.

Printed warning

DANGER

NEVER LIFT LOADS OVER PEOPLE.

NEVER WALK OR STAND UNDER A SUSPENDED LOAD.

Size options

The current size selections are 4¾ × 3¾ inches, 8 × 6⅜ inches, and 10 × 8 inches. Compare the selected size, wording, and design with the label you need before ordering.

Placement and use

This adhesive vinyl label communicates a suspended-load warning. It does not replace lift planning, personnel exclusion procedures, operator training, or equipment instructions, and displaying it does not certify equipment or workplace compliance.

Follow the equipment manufacturer's label-location instructions. As general placement guidance, choose a visible, suitable surface where the intended operator or ground personnel can read the warning before entering the lifting area. Do not cover controls, identification plates, or existing warnings. Apply to a suitable clean, dry surface.

Created, printed, cut, and shipped in the USA. Contact us if you need help matching a replacement label or confirming dimensions.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search