Keep Clear of Truck & Load Electrocution Hazard Sticker

EC-010

This Keep Clear of Truck & Load electrocution hazard sticker warns of the danger of contacting a load, crane or vehicle if the boom or loadline becomes electrically charged. Its red DANGER header and crane-and-power-line illustration make the electrical warning distinct from a general keep-clear or load-capacity label.

Printed wording

DANGER
ELECTROCUTION HAZARD
DEATH OR SERIOUS INJURY

WILL RESULT FROM CONTACT WITH THE LOAD, THE CRANE,
OR THE VEHICLE IF THE BOOM OR LOADLINE SHOULD
BECOME ELECTRICALLY CHARGED.

KEEP CLEAR OF TRUCK & LOAD

Product details

  • Listed size: 12 inches wide × 4 inches tall.
  • Product code: EC-010.
  • Horizontal layout with warning text on the left and an illustration of a crane, suspended load, overhead wires and people on the right.
  • Non-OEM replacement reference numbers: 875887, 2-651-00184 and 265100184. Compare the artwork, dimensions and required warning with your existing label; these references are not a guarantee of fit for every machine.

Recommended placement

As general placement guidance, choose an outward-facing fixed surface on the crane truck or vehicle body where ground personnel approaching the truck or load area can read the warning before entering the hazard area. A label visible only inside the cab would not serve the same ground-facing audience.

Follow the equipment manufacturer’s specified warning-label locations and replacement requirements. This is not a verified factory mounting location. Do not obscure controls, instruments, viewing areas or existing warnings.

What this warning does not establish

This is an electrical hazard reminder, not an insulating component, a load-rating plate or a complete power-line safety procedure. It does not show that equipment is electrically safe, establish a safe approach distance or replace the manufacturer’s instructions and site-specific electrical safety procedures.

If you need help matching an existing label, contact us with a clear photo, dimensions and equipment details.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search