An equipment safety decal needs attention when it is missing, damaged, unreadable, or no longer matches the information required for the machine. The next step is to check the equipment documentation and follow its inspection and replacement instructions.
Do not judge a warning only by whether it still sticks to the surface. A firmly attached label can have faded instructions, missing symbols, or incorrect information.
Start with the equipment manual
Use the manual and decal-location information applicable to the equipment’s model and serial number. Check which labels are specified, where they belong, and what the manufacturer says about inspecting, cleaning, and replacing them.
For example, the Genie Z-45/25 and Z-45/25J operator’s manual directs users to replace missing or damaged safety signs. That is guidance for the equipment covered by that manual, not a substitute for checking another machine’s instructions.
Do not create a universal replacement schedule from a decal’s age or an advertised material lifespan. Follow the applicable equipment requirements and assess the label’s actual condition.
Check the complete message, not just the header
Read the whole label, including its instructions, symbols, diagrams, and any equipment-specific information.
Look for fading, scratches, missing sections, paint, dirt, or other obstructions that prevent the message from being read. A visible “WARNING” or “DANGER” header does not make up for unreadable instructions beneath it.
Check the marking from its intended viewing position. A label that can be read only by moving unusually close may not provide a useful reference from the position where its information is needed.
If you cannot identify the complete message, consult the equipment documentation or manufacturer rather than reconstructing it from fragments.
Inspect for physical damage
Examine the decal for peeling edges, tears, cracking, abrasion, and missing pieces.
Consider whether damage affects the wording, symbols, or attachment. An edge that is lifting may also make part of the label difficult to see or leave it vulnerable to further damage.
Follow the equipment’s replacement instructions. Do not trim away damaged instructions, cover missing wording with unrelated stickers, or treat a handwritten guess as an equivalent replacement warning.
If repeated damage occurs in the same location, report it to the person responsible for the equipment. Do not relocate a required marking without checking the applicable placement instructions.
Distinguish dirt from permanent damage
A dirty label and a permanently damaged label are not the same problem. Follow the applicable cleaning instructions before deciding whether the message can be restored to a readable condition.
Use only a cleaning method compatible with the decal and the equipment surface. Do not assume that a solvent suitable for preparing a bare panel is suitable for cleaning a printed warning.
The Genie manual cited above specifies mild soap and water for its safety signs and warns against solvent-based cleaners because they may damage the sign material. Check the instructions for your own equipment and labels rather than applying that example universally.
If cleaning does not restore the complete message, follow the replacement procedure.
Check for missing or incorrect markings
A decal can look new and still be the wrong label.
Compare the installed markings with the equipment’s label list or decal-location diagram. Check the wording, symbols, language, part number, and any diagrams or ratings.
After repainting, component replacement, or equipment modification, have the responsible person verify which markings are required and whether the existing information remains correct. A label should not be copied automatically if the equipment configuration has changed.
Never invent a missing load rating, operating limit, or setup instruction. Obtain verified information from the equipment documentation, manufacturer, or another appropriate authorized source.
Match the replacement to the equipment
Choose a replacement by its complete content and intended application, not simply by its color or dimensions.
For example, our Outrigger Extension Warning Sticker includes diagrams for particular outrigger positions and a warning about corresponding capacity-limiter settings. Those illustrations should not be assumed to match every crane’s outrigger or locking-pin arrangement.
Likewise, the Crush Zone Warning Sticker communicates a hand-crushing hazard. It does not identify every possible machine hazard or replace equipment-specific instructions.
Before ordering, compare:
- The complete wording and symbols.
- Diagrams and their relationship to the actual equipment.
- Language and readable part numbers.
- Finished dimensions and orientation.
- The specified mounting location.
A similar-looking decal is not necessarily an equivalent replacement.
Photograph and record the old label before removal
When it can be done safely, photograph the existing label before removing it.
Capture a close-up of the message and a wider view showing its location. Record readable part numbers, dimensions, and relevant equipment details. Identify any missing or uncertain information rather than presenting an estimate as an exact match.
For sizing and reference-photo guidance, see How to Measure a Replacement Safety Decal Before Ordering.
If the label is completely missing, use the manual or decal-location diagram. An adhesive outline may help document a former location, but it does not establish the correct replacement wording or shape.
Install the correct replacement in the specified location
Follow the equipment manufacturer’s placement instructions. Preserve the documented location when replacing a matching label unless an authorized instruction specifies otherwise.
Keep controls, instruments, viewing areas, identification plates, load information, and other required markings unobstructed.
Check that the replacement suits the mounting surface and application conditions. Follow the relevant preparation and installation instructions rather than applying a new label over an unsuitable surface.
Our safety decal application guide explains general preparation and positioning practices. Equipment-specific instructions still take priority.
Know when to ask for help
If a required warning is missing, unreadable, or uncertain, report it to the person responsible for the equipment and follow the applicable inspection and operating procedures.
Do not use this guide as permission to continue operating while a required marking is unresolved. Whether equipment can remain in service must be determined through the applicable requirements and responsible personnel.
Replacing a sticker also does not repair the hazard it describes. A warning label is not a guard, interlock, inspection, or verification that the equipment is safe.
Replacement checklist
Before ordering or installing a replacement, confirm:
- The applicable equipment manual and decal-location information.
- The complete required message and artwork.
- Whether cleaning is appropriate or replacement is needed.
- Any damage, missing sections, or incorrect information.
- The replacement’s wording, symbols, language, dimensions, and part number.
- The specified location and suitable application conditions.
- Any unresolved question requiring manufacturer or responsible-person review.
The goal is not simply to make the equipment look freshly labeled. It is to restore the correct, readable information in the appropriate location.
Leave a comment (all fields required)