Backup Alarm Warning Sticker – Danger Failure to Maintain Alarm, 4¾ × 3¾ Inches

I-012

This backup alarm warning sticker reminds drivers that the alarm must sound when backing and must be kept in operable condition. I-012 measures 4¾ inches wide × 3¾ inches tall and features a red DANGER header with a safety-alert symbol, black instructions on white, and DEATH OR SERIOUS INJURY highlighted in red.

Printed backup alarm message

The label reads:

FAILURE TO MAINTAIN THE BACKUP ALARM WILL RESULT IN DEATH OR SERIOUS INJURY

This vehicle is equipped with a backup alarm.

  • Alarm must sound when backing
  • It is the drivers responsibility to operate this vehicle in a safe manner and keep alarm in operable condition.

Check the wording before replacing a label

Choose this adhesive warning label for a vehicle equipped with a backup alarm where the message matches the equipment manufacturer’s instructions and your operating procedures. Compare the complete wording and 4¾ × 3¾-inch dimensions with the warning you need to replace. This is a printed reminder, not a backup alarm, alarm component, or inspection record.

As general placement guidance, select a visible position where the driver can read the warning, following the vehicle or equipment manufacturer’s label-location guidance. Apply to a suitable clean, dry surface without covering controls, nameplates, or existing instructions. Replace the label if it becomes damaged or unreadable.

Does this label specify an alarm sound level?

No. The artwork says the alarm must sound when backing, but it does not specify a decibel rating or certify an alarm to an OSHA, DOT, or SAE requirement. Check the applicable equipment documentation and requirements separately; the sticker does not establish that the alarm system or vehicle is compliant.

Contact us to discuss custom wording, size, or logo requirements before ordering. Created, printed, cut, and shipped in the USA.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search