Crane Safety Rules Sticker – DANGER Failure to Obey

This crane safety rules sticker displays eight instructions covering daily inspection, equipment stability, controls, load handling, winch-drum wraps and travel stowage. A red DANGER header and red DEATH OR SERIOUS INJURY wording introduce the black checklist on white.

Full printed warning and rules

DANGER
FAILURE TO OBEY THE
FOLLOWING WILL RESULT IN
DEATH OR SERIOUS INJURY

• Inspect equipment and its operation daily.
• For equipment stability, use only on solid, level surface with outriggers properly extended.
• Equipment must be level.
• Operate all controls slowly and smoothly.
• Never operate the equipment with personnel under boom or load.
• Keep load under boom tip. Do not side load boom or drag loads. Avoid free swinging loads.
• Keep at least 3 wraps of loadline on winch drum.
• For travel, boom and outriggers must be in stowed position.

Size and replacement matching

Size: 4 inches wide × 5 inches tall. This adhesive warning sticker has a white safety-alert triangle in its red header and a black rounded border. It is not a rigid sign, inspection record or load chart.

Match the complete eight-rule message, layout and dimensions to the label specified for your equipment. A similar DANGER header or “Failure to obey” introduction does not make other safety-rule decals interchangeable.

Recommended placement

Choose a suitable fixed surface in the operator's normal viewing area, where the rules can be read before operation or travel. For exterior controls, use a corresponding operator-facing location rather than relying on a label inside an unused cab.

This is general guidance, not a verified factory mounting location. Follow the equipment manufacturer's model-specific decal locations. Keep controls, gauges, windows, load charts, existing warnings and service access unobstructed. Apply to a suitable clean, dry surface.

Use with equipment-specific instructions

The rules above reproduce the artwork; they are not a complete operating, inspection or setup procedure. Confirm that the message applies to the machine and configuration, including the printed outrigger, winch-wrap and travel-stowage instructions. Follow the manufacturer's requirements for your equipment rather than treating this label as a universal specification.

This sticker does not establish lifting capacity, verify ground support or inspections, or make equipment safe to operate. It does not guarantee compliance, prevent accidents or eliminate fines and lawsuits.

For help matching a replacement or requesting a different size, contact us about the IC-005 crane safety rules sticker with a clear photo, dimensions and equipment details.

Created, printed, cut and shipped in the USA.