Outrigger Beams Must Be Pinned for Travel Caution Sticker

I-022

This 4-inch-wide × 5-inch-tall caution sticker reminds operators to pin outrigger beams before travel. I-022 has a yellow CAUTION header, safety-alert symbol, and two black-text instructions on a white background.

Printed warning

  • “Outrigger beams must be pinned for travel.”
  • “If not pinned, Outrigger beams may drift out during travel.”

The message concerns securing outrigger beams for transport, not selecting outrigger pads or setting up the crane for lifting. This is an adhesive warning decal, not a locking pin or other securement component.

Placement and use

For replacement labels, follow the equipment manufacturer's specified location. For an additional reminder, choose a visible, suitable surface near the beam-locking or pre-travel check point, without covering existing warnings or identification. The appropriate location depends on the equipment layout; this listing does not establish a model-specific mounting point.

Apply to a suitable clean, dry surface. Follow the equipment manual for the actual beam securement procedure and pre-travel checks; the decal is a reminder, not a substitute for those instructions.

Need the Spanish-language version? See Spanish pin-before-travel outrigger sticker I-022SP.

Created, printed, cut, and shipped in the USA. For a different label size or wording, contact us.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search