Battery Explosion / Fire Hazard Danger Sticker – 7 × 2½ Inches

DNGR-002

This battery explosion and fire hazard danger sticker warns people to charge batteries in a well-ventilated area free of flames, smoking or sparks. The horizontal design combines a red DANGER header, no-smoking and no-flame symbols, and an explosion illustration.

Full printed warning

DANGER
EXPLOSION / FIRE HAZARD

CHARGE BATTERIES IN WELL VENTILATED AREA.

Free of Flames, No Smoking or Sparks
Failure To Follow This Warning
Could Cause Serious Injury Or Death!

The explosion illustration also contains the word “BOOM!”

Size and product details

  • Size: 7 inches wide × 2½ inches tall.
  • Product code: DNGR-002.
  • Laminated adhesive safety sticker.
  • Red DANGER header with two prohibition symbols and an explosion pictogram.
  • Created, printed, cut and shipped in the USA.

Recommended placement

As a general recommendation, place the warning on a visible fixed panel beside the battery compartment access or charging connection, where it can be read before opening the compartment or connecting charging equipment. At a fixed charging station, an adjacent panel facing the person making the connection can be suitable.

This is general guidance, not a verified factory location for a particular machine or battery. Follow the equipment and battery manufacturers' label-placement instructions. Keep vents, terminals, caps, connectors and existing service labels unobstructed. Do not assume the decal is suitable for direct application to a battery casing without manufacturer approval.

Before ordering

Check the warning wording and 7 × 2½-inch size against your replacement needs. This is an equipment or charging-area hazard reminder, not a battery shipping label, battery identification label or confirmation of charger compatibility. It does not specify battery chemistry, charging settings or ventilation requirements, and it does not replace the manufacturer's charging and maintenance instructions.

For help matching a replacement warning, contact us with a photo of the original label and its dimensions.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search