Digger Derrick DANGER Sticker: Failure to Obey Safety Rules

I-057

This Digger Derrick DANGER sticker displays operating reminders for crews working with digger derrick equipment. Its printed warning begins: “Failure to obey the following will result in death or serious injury.”

Instructions printed on the sticker

  • For stationary operation, securely park the truck, disengage the driveline, and properly stabilize the digger derrick.
  • Extend all outriggers on a solid, level surface to help avoid tip-over.
  • Operate controls slowly and smoothly, and return them to neutral after operation.
  • Never operate with personnel under the boom or load.
  • Keep the load under the boom tip; do not side-load the boom or drag loads, and avoid free-swinging loads.
  • Before moving the vehicle, stow and secure the booms, auger, and outriggers.
  • Top controls are required when working from the platform on structures with energized lines or components.
  • Refer to the operator’s manual for complete instructions; replace the manual if missing.

Size and origin

Sticker size: 4.25 inches wide × 5.5 inches tall. Created, printed, cut, and shipped in the USA.

Use the sticker as an operating reminder alongside the equipment operator’s manual and applicable site procedures. The sticker itself does not certify equipment or establish compliance for every machine or worksite.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search