Untrained Operator Aerial Lift Danger Sticker

EAL-001

This untrained operator aerial lift danger sticker warns against operating the machine without training, understanding the operating instructions, and checking that safety features are in place and in proper condition. Its red DANGER header introduces the full operator warning and three printed conditions for operation.

Printed wording

DANGER
AN UNTRAINED OPERATOR
SUBJECTS HIMSELF AND OTHERS TO
DEATH OR SERIOUS INJURY

YOU MUST NOT OPERATE
THIS MACHINE UNLESS

  • You have been trained in the safe operation of this device, and
  • You read, understand and follow the safety and operating recommendations contained in this machines manufacturer's manuals, your employers work rules and applicable government regulations.
  • you are sure that all safety signs, guards and other safety features are in place and in proper condition.

Product details

  • Listed size: 4 inches wide × 5 inches tall.
  • Product code: EAL-001.
  • Red DANGER header with an exclamation symbol, black wording on white, and red emphasis on “DEATH OR SERIOUS INJURY.”
  • Three conditions addressing training, instructions and the condition of safety features.

Recommended placement

As general guidance, place this operator-facing warning on a visible fixed panel at the relevant aerial lift control station or access point, where personnel can read it before operating the machine. If ground and platform controls are separate, follow the manufacturer's labeling instructions for each station rather than assuming one label serves both.

Use the equipment manufacturer's specified replacement-label position when available. A model-specific factory location has not been verified here. Check the wording and dimensions against your equipment, and keep controls, displays, capacity plates and other required markings unobstructed.

A warning label, not operator authorization

The sticker communicates the printed operating restrictions. It does not provide training, certify an operator, verify the condition of guards or authorize use of the aerial lift. Follow the manufacturer's manuals, your employer's procedures and the requirements applicable to the equipment and work.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search