Front Stabilizer Operation Caution Sticker – Level Crane First

I-030

This Front Stabilizer Operation caution sticker reminds operators to set the front stabilizer after leveling the crane. I-030 measures 4 inches wide × 2½ inches tall and features a yellow CAUTION header with a safety-alert symbol above black instructions on white.

Printed label text

CAUTION

FRONT STABILIZER OPERATION

SET FRONT STABILIZER AFTER LEVELING CRANE

Check the required setup sequence

Choose this label when its wording matches the crane manufacturer's front-stabilizer setup procedure. Compare the instruction with the equipment manual and existing markings before ordering. This is a reminder of one setup sequence, not a complete crane-leveling procedure or a universal instruction for every stabilizer system.

Placement and application

For a replacement, follow the manufacturer's specified label location. Where an additional reminder is appropriate, select a suitable visible surface near the matching front-stabilizer controls without covering other warnings, instructions, or identification. Apply to a clean, dry surface.

This adhesive label is laminated and is created, printed, cut, and shipped in the USA.

For Spanish-language wording, see the Spanish Front Stabilizer Operation sticker I-030SP. For different wording or sizing, contact us.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search