Max Load Capacity Stickers – 5 × 24 Inches, Stock & Custom Ratings

I-051-3/4-Ton-5x24

Display your equipment’s established load rating with a yellow-and-black MAX CAP sticker. This adhesive vinyl capacity strip measures 24 inches wide × 5 inches tall and uses bold black lettering on a yellow background.

Choose your printed rating

Available selections are ¾ Ton, 2,000 LBS, 3,000 LBS, 4,000 LBS, 6,000 LBS, and 20,000 LBS. Match the number and unit to the equipment’s authorized rating information before ordering.

Custom LBS orders

Select Custom LBS and enter the required weight in the Notes section of your shopping cart. Supply the established capacity you want printed; this service prints your information rather than calculating or certifying an equipment rating. Contact us before ordering if you need different wording or dimensions.

Size and application

The standard decal is 24 inches wide × 5 inches tall. Check the available mounting space, surface suitability, and intended viewing position. Apply to a suitable clean, dry surface following the decal and equipment instructions. Overall sticker size alone does not guarantee readability from a particular distance.

OSHA rated-load marking requirements

For overhead and gantry cranes covered by OSHA 1910.179(b)(5), the rated load must be plainly marked on each side of the crane. If the crane has more than one hoisting unit, each hoist must have its rated load marked on it or its load block, and this marking must be clearly legible from the ground or floor.

The requirement is for appropriate rated-load markings, not the purchase of this particular sticker. Confirm that your selected rating, marking size, and placement suit your equipment and the requirements applicable to it. Confirm the applicable ASME standard for your particular crane or hoist rather than assuming one standard covers every design.

This decal displays capacity information. It does not establish or increase rated capacity, replace a load chart, or guarantee compliance or inspection approval.

Compare other formats in our Max Load Capacity Stickers, Labels & Signs collection.

The standard sticker measures 24 inches wide × 5 inches tall. If you need different dimensions, contact us to discuss custom sizing and availability. Check the available mounting space and intended viewing distance before ordering.

The listed options are ¾ Ton, 2,000 LBS, 3,000 LBS, 4,000 LBS, 6,000 LBS, and 20,000 LBS, plus Custom LBS. Choose the number and unit that match your equipment’s established rating.

Select Custom LBS and enter the required weight in the Notes section of your shopping cart. Supply the established capacity you want printed. We print the information you provide; we do not calculate or certify equipment capacity.

Follow the equipment manufacturer’s marking instructions and the requirements applicable to your crane. For overhead and gantry cranes covered by OSHA 1910.179(b)(5), the crane’s rated load must be plainly marked on each side. If there is more than one hoisting unit, each hoist must have its rated load marked on it or its load block, with that marking clearly legible from the ground or floor. Check that the selected decal and placement provide suitable readability.

No. OSHA 1910.179(b)(5) requires rated-load markings on covered cranes, not this particular product. The sticker displays capacity information; it does not establish or increase the equipment’s rating, replace a load chart, or guarantee compliance or inspection approval.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search