Bilingual Danger Hot / Peligro Caliente Safety Sticker – English & Spanish

BL-001O-3.5x5

This bilingual Danger Hot / Peligro Caliente sticker communicates a heat warning in English and Spanish on one label. The vertical design places DANGER — HOT above PELIGRO — CALIENTE, with red oval OSHA danger headers on black and bold black wording on white.

Two sizes, the same bilingual warning

  • 3½ inches wide × 5 inches tall: SKU BL-001O-3.5x5.
  • 5 inches wide × 7 inches tall: SKU BL-001O-5x7.

Both options are laminated adhesive vinyl stickers. Choose the smaller size for a more limited mounting space or the larger format where space allows and larger lettering is needed. Check the intended viewing distance and allow room for both language panels.

Check the mounting temperature, not just the warning

The word HOT identifies the warning message; it does not mean the vinyl is suitable for direct application to every hot surface. Before applying to equipment that heats up, confirm that the mounting surface’s operating temperature is compatible with the vinyl, adhesive, and laminate. Contact us with your application details if you need help checking suitability.

As general placement guidance, position the warning where it can be read before someone encounters the heat hazard, following equipment manufacturer guidance and your facility’s procedures. Apply to a suitable clean, dry surface without covering controls, nameplates, or existing instructions. This is a printed warning, not a temperature indicator, and it does not replace guarding or safe work procedures.

Created, printed, cut, and shipped in the USA.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search