Container Doors Must Be Open While Engine Is Running Sticker – I-021

I-021

This container-door notice sticker reminds operators to keep all container doors open while the engine is running. I-021 measures 8 inches wide × 5 inches tall and features a blue NOTICE header with red lettering on a white background. Adhesive vinyl label.

Printed message

NOTICE

ALL container doors MUST be open while engine is running to allow proper engine ventilation.

Running engine with doors closed WILL cause equipment damage.

Check the notice against your equipment

Choose this label for equipment whose operating instructions require the printed message. Before ordering a replacement, compare the wording, size, and design with the label you need.

The sticker communicates an operating instruction; it does not establish that opening doors alone provides adequate ventilation or makes engine operation safe. Follow the equipment manufacturer's requirements for ventilation, exhaust routing, and operation.

Place the label where operators can read it before starting the engine, following any equipment-specific placement instructions. Apply to a suitable clean, dry surface without covering other warnings, identification plates, or controls.

Created, printed, cut, and shipped in the USA. Contact us if you need help matching the label.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search