Brandt Hi-Rail Truck Instruction Decals – Road to Rail / Rail to Road

This Brandt hi-rail truck instruction decal set includes two labels: one Road to Rail and one Rail to Road. Each shows a printed 12-step transition sequence with numbered lever and switch references for matching equipment.

The Road to Rail label has black lettering on white; the Rail to Road label has white lettering on black. Compare both sequences and every control reference with your truck's original labels and manufacturer's manual before ordering. These are replacement instruction labels, not a universal hi-rail operating procedure.

What is included

• 1 × Road to Rail instruction decal.
• 1 × Rail to Road instruction decal.
• Each label measures 9¾ inches wide × 5¾ inches tall.
• Product code: RTR-001.
• Created, printed, cut and shipped in the USA.

Road to Rail: full printed text

ROAD TO RAIL
Hold Hi-Rail Hydraulics Switch In "ON" Position

1. Remove Rear Rail Axle Safety Chains
2. Remove Front Hi-Rail Safety Pins
3. Lower Rear Rail Axle
4. Inflate Rear Rail Axle Airbags
5. Inflate Steering Axle Airbags-60 Sec.
6. Disengage Shackle Lock Pin
7. Deflate Steering Axle Airbags
8. Pin Steering Axle
9. Raise Tag Axle
10. Lower Front Rail Axle
11. Inflate Front Rail Axle Airbags
12. Install Front Hi-Rail Safety Pins

Printed control references, in their displayed order:
#4 Lever - Lower
#8 Switch - Inflate
#5 Switch - Inflate
#1 Lever - Unlock
#5 Switch - Deflate
#2 Lever - Lock
#7 Switch - Deflate
#3 Lever - Lower
#6 Switch - Inflate

Rail to Road: full printed text

RAIL TO ROAD
Hold Hi-Rail Hydraulics Switch In "ON" Position

1. Remove Front Hi-Rail Safety Pins
2. Deflate Front Rail Axle
3. Lift Front Rail Axle
4. Unpin Steering Axle
5. Inflate Steering Axle Airbags-60 Sec.
6. Engage Shackle Lock Pin
7. Deflate Steering Axle Airbags
8. Deflate Rear Rail Axle Airbags
9. Raise Rear Rail Axle
10. Lower Tag Axle
11. Install Front Hi-Rail Safety Pins
12. Install Rear Rail Axle Safety Chains

Printed control references, in their displayed order:
#6 Switch - Deflate
#3 Lever - Raise
#2 Lever - Unlock
#5 Switch - Inflate
#1 Lever - Lock
#5 Switch - Deflate
#8 Switch - Deflate
#4 Lever - Raise
#7 Switch - Inflate

Recommended placement

As a general recommendation, place the pair together on a visible fixed panel beside the hi-rail transition controls, where the operator can read both labels while identifying the relevant levers and switches. For an exterior control station, use an adjacent outward-facing panel or fixed control-enclosure surface. For an in-cab transition control station, choose an adjacent operator-facing panel instead. Do not cover controls, gauges, interlock information or existing warnings.

This is not a verified factory mounting location for a particular Brandt model. Match the original label location and manufacturer's instructions; do not assume the same control layout applies to every hi-rail truck.

Check compatibility before ordering

Brandt identifies the equipment application, not verified compatibility with every Brandt model or configuration. Check the label dimensions, both printed sequences, control numbers and switch functions against your specific truck. If anything differs, do not use these labels as operating instructions for that equipment.

This set supplies two instruction decals only. It does not modify or verify the truck's hydraulics, airbags, pins, chains or interlocks, and it is not an equipment inspection or compliance certificate. Follow the manufacturer's current operating and maintenance instructions.

For help matching a replacement, contact us with photos of the original labels, their dimensions and the equipment model.