Battery Warning Sticker – Explosion / Fire Hazard

WRN-003

This battery warning sticker displays an explosion / fire hazard message and reminders about ventilated charging and ignition sources. WRN-003 measures 6 inches wide × 2⅝ inches tall, with an orange WARNING header, black text on white, and a colored explosion illustration.

Full printed sticker text

WARNING

EXPLOSION / FIRE HAZARD

CHARGE BATTERIES IN WELL VENTILATED AREA.

Free of Flames, Smoking or Sparks.
Failure To Follow This Warning
Could Cause Serious Injury Or Death!

The explosion illustration also contains the word “BOOM!”

Choose the matching battery warning label

Use this design when the printed charging warning matches your equipment and battery manufacturer's labeling instructions. Compare the full wording and 6 × 2⅝-inch dimensions with the original marking and available space before ordering.

This is a battery charging hazard reminder, not a battery identification label, shipping mark, charging instruction sheet, or fire-protection device. It does not specify battery chemistry, charger compatibility, ventilation requirements or a complete charging procedure. Follow the battery, charger and equipment manufacturers' instructions for the actual installation.

Recommended placement

A practical general location is a visible panel beside the battery compartment access or charging connection, where the person charging or servicing the batteries can read the warning before starting. For a designated charging area, consider a nearby fixed panel facing the charging position, where the warning matches that installation.

This is general guidance, not a verified factory location for every crane, forklift, backhoe or excavator. Retain the original label location when known and follow the manufacturer's decal-location instructions. Do not cover battery identification, charger instructions, vents, terminals, access fasteners or other warnings, and do not place the decal across removable caps.

Apply to a suitable clean, dry surface according to the decal application instructions. Created, printed, cut, and shipped in the USA. For different wording or sizing, contact us.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search