Never Hoist Personnel on Loadline Warning Sticker – ANSI-Style Header

I-015

This Never Hoist Personnel warning sticker carries the printed prohibition against hoisting people on the crane loadline. The text-only design has a rectangular red DANGER header with a triangular alert symbol. Compare the full warning, size and layout with the label specified for your equipment before replacing a missing or unreadable decal.

Printed Warning

DANGER

HOISTING PERSONNEL ON CRANE LOADLINE WILL RESULT IN DEATH OR SERIOUS INJURY

Never hoist personnel on hook, load or any device attached to loadline.

The injury statement above is quoted from the artwork. This product supplies a warning decal, not a lockout device, personnel-lifting procedure or certification of the crane's configuration. Follow the manufacturer's required labels and instructions.

Replacement Decal Details

  • Size: 4¾ inches wide × 3¾ inches tall
  • SKU: I-015
  • English-language text-only design
  • Rectangular DANGER header with triangular alert symbol, described here as ANSI-style
  • Created, printed, cut and shipped in the USA

The header terminology describes its appearance, not standards certification or approval. Match the complete wording and dimensions to your equipment requirements.

Oval-Header Alternative

For the same printed warning with an oval red DANGER header on black, see the OSHA-style personnel-hoisting warning sticker, I-015O. Both listed versions measure 4¾ × 3¾ inches; choose the required header layout rather than treating the style name as proof of compliance.

General Placement Guidance

Follow the manufacturer's decal map and preserve the original warning position when known. For cab-operated cranes, general guidance is a readable fixed interior panel near the operating position. For ground-control boom trucks, use a fixed panel beside the applicable controls. Where the warning also needs to be communicated to ground personnel, follow manufacturer guidance for an approach-facing exterior location.

These are general recommendations, not verified factory positions for every model. Do not assume the hook or load block is the correct mounting location. Do not obscure controls, instruments, windows, load charts, identification plates or other warnings. Follow the supplied application instructions.

Custom Warning Options

Need different wording, a different language or a company logo? Contact us to discuss custom sign or decal requirements.

I-015 measures 4¾ inches wide × 3¾ inches tall.

It reads “HOISTING PERSONNEL ON CRANE LOADLINE WILL RESULT IN DEATH OR SERIOUS INJURY,” followed by “Never hoist personnel on hook, load or any device attached to loadline.”

Follow the manufacturer’s decal map and preserve the original position when known. General guidance is a readable fixed panel near the operating position in a crane cab, or beside the applicable ground controls on a boom truck. Follow manufacturer guidance for any additional exterior warning location. Do not assume the hook or load block is the correct mounting location, and do not obscure controls, windows, load charts or other warnings. These are general recommendations, not verified factory positions.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search