Hard Hat Required While Crane Is in Operation – Danger Sign & Decal

ADI-001

Post “HARD HAT REQUIRED WHILE CRANE IS IN OPERATION” with this Danger sign or adhesive decal. ADI-001 features a red DANGER header with a safety-alert symbol, a black-and-white hard-hat pictogram, and the printed instruction beside it.

Choose your size and material

  • 11-inch-wide × 5½-inch-tall laminated vinyl decal.
  • 12 × 18-inch laminated vinyl decal.
  • 12 × 18-inch aluminum sign.

Select the size and material before ordering. The vinyl options are adhesive decals; the aluminum option is a rigid sign. Other sizes are available by special order through our contact page.

A hard-hat notice tied to crane operation

The message specifically identifies the hard-hat instruction while the crane is operating. This is a workplace notice, not a sticker indicating a hard-hat wearer's qualifications or training.

Choose the header and wording specified for your site. If you need the yellow-header version, see the Caution hard-hat-required sign, ACI-002.

Placement considerations

Use a visible posting point where people can read the instruction before entering the applicable work area, following your site's placement procedures. Apply the adhesive decal to a suitable clean, dry surface. Confirm the mounting arrangement for the aluminum sign; mounting holes and included hardware are not specified in this listing.

Created, printed, cut, and shipped in the USA.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search