Hard Hat, Safety Glasses & Safety Shoes Required – Crane Area Sign

ACI-003

This crane-area caution sign lists three items of protective equipment: hard hat, safety glasses, and safety shoes. The printed instruction reads “REQUIRED WHEN WORKING IN CRANE AREA,” with a yellow CAUTION header and separate hard-hat, eyewear, and boot pictograms.

Available sizes and materials

  • 11-inch-wide × 5½-inch-tall laminated vinyl decal.
  • 12 × 18-inch laminated vinyl decal.
  • 12 × 18-inch aluminum sign.

Choose the size and material from the selector before ordering. The vinyl versions are adhesive decals; the aluminum version is a rigid sign. Other sizes are available by special order through our contact page.

Three equipment reminders in one notice

ACI-003 is for posting the combined hard-hat, safety-glasses, and safety-shoes instruction where people work in the crane area. Unlike a hard-hat-only notice, it names all three items and shows a pictogram for each.

Choose a visible posting point where the notice can be read before people enter the applicable work area, following your site's placement procedures. Apply the adhesive decal to a suitable clean, dry surface. For the aluminum sign, confirm the mounting arrangement you need; mounting holes and hardware are not specified in this listing.

Created, printed, cut, and shipped in the USA.

Technical & Safety Data

Product Composition & Identification

Film Construction: 2.75 mil Polymeric Calendered Vinyl base paired with a 2.75 mil flexible clear Polymeric Calendered Vinyl overlaminate.

Adhesive System: Clear Solvent-Based Permanent Pressure Sensitive Acrylic.

Total Adhesive Thickness: 2.3 mil combined (1.2 mil base and 1.1 mil laminate).

Health, Safety & Regulatory Compliance

Fire Rating: Class A fire rating under ASTM E84-17 testing.

Commercial Safety: Meets the highest life safety requirements for indoor and outdoor commercial graphics.

Toxicity & Structure: Phthalate-Free Film Structure.

Regulatory Standards: Meets the health and safety requirements set forth by CPSIA, REACH, RoHS, and California Proposition 65.

Physical & Chemical Properties

Chemical Resistance: Resists mild acids, mild alkalis, solvents, and salts.

Moisture Resistance: Excellent resistance to water, including full immersion.

Tensile Strength: 12.5 Pounds/Inch.

Dimensional Stability: 0.020 Inch (Machine Direction).

Peel Adhesion: 4.5 Pounds/Inch from Stainless Steel.

Environmental & Temperature Tolerances

Operating Temperature Range: -40°F to 190°F.

Application Temperature: 50°F to 80°F recommended.

Installation Surface: Clean, dry, and free of dust, dirt, debris, or grease.

Outdoor Lifespan: Up to 5 years permanent durability.

Search